What Are The Different Types of Bird Feeders?

Types of Bird FeedersIf you are a nature enthusiast and if you prefer watching birds, then you need plans so you can see the birds in your yard as they eat, after you have assembled your bird feeder of course.

In this write-up you will definitely find out a few things about bird feeder plans, attracting birds to your home and the different types of bird feeders.

Types of Bird Feeders

When you plan your bird feeder, it’s essential to know the feeding habits of birds you want to entice. It is more desirable to engineer the bird feeder based up on those kinds of birds.

There are 5 Types of Bird Feeders:

1. Tray style

One of the types of bird feeders is the tray style. It consist of a platform the seeds are scattered on. The tray can easily be placed on a table which permits the birds that like to feed off the ground to make use of it.

If you place the tray on top of a pole then you can keep the unwanted varmints from eating the bird seed especially if the pole is a 4″ or better yet 6″ diameter PVC pipe. These types of bird feeders may be remarkably straightforward or they can be quite complex as well as made to look like southern mansions, log cabins or even replicas of the homeowner’s residence.

Bird feeders like these appeal to a wide range of birds. Providing for rain water drainage will definitely help keep the seed from spoiling. By drilling some holes in the bottom then covering those holes with window screen allows the rain water to drain out.

2. Hopper feeders

Another one of the types of bird feeders is the hopper feeders, which are perhaps the most usual type of feeder. They have at least one wall slanted with the narrow opening on the bottom that allows the seed to drop into a platform or tray.

Both sides could be on an angle or one side vertical and the other be on an angle to it. The bottom holding the seed really should have a means for rain water to drain (see above). Likewise the roof ought to be removable so the feeder can easily be refilled and cleaned.

3. Tube types

Tube types of bird feeders are long, narrow and have a number of holes for the birds to feed from. Little dowels can be put around the feeding spaces so the birds can easily have a place to perch while they eat.

Other methods for the birds to perch include a small ledge near the openings or by utilizing a piece of heavy gauge solid copper wire coiled around the feeder allows numerous birds to eat simultaneously. Tube feeders could also drop the seed the same manner as the hopper type onto a platform or tray.

In this case the tube has little openings around the base that lets the seed drop into the larger bottom section. These types of bird feeders also ought to enable for drainage of rain water.

4. Suet type

They have a cage-like framework with the animal fat placed inside. Other kinds of wire mesh might also be made use of, the idea is to hold the animal fat but still let the birds have access. The size of the holes in the cage or mesh will certainly predetermine the size of the birds that will be able to eat.

This type is best matched for cold weather in as much as the fat will definitely go rancid in hot weather but it provides much required nourishment throughout the winter time months.

5. Hummingbirds

These are entirely different because they need for a liquid (sugar water) diet. The feeders you make should be able to hold the liquid however still permit the birds to access the nectar. Red and yellow are colors to use to entice these birds.

Putting out a bird feeder alone is not adequate to insure you’ll entice any birds, the positioning of the feeder is essential and you could choose to experiment with different places. Designing different feeders, each having only one kind of seed, will certainly attract a diversity of birds and reduce the amount of seed that lands on the ground.

The bird feeder can easily be secured to the branch of tree to keep cats and other animals away as well as present the birds a site to perch when they ‘re not feeding. You can also make use of poles to hang the feeders from. You really should clean the feeder roughly once a month to prevent it from becoming contaminated.